Peep Reducer

$11.00

Description

  • The Peep Reducer (#753-3) can be used with the Large peep housings (#749-37L, #749-37LH, and #753LH) to reduce the hole size to match the 3/16″ opening found on our smaller standard size Pro Series and Ultra Lite peeps.
  • This will allow 1/8″ and smaller original Apertures, Clarifiers, and Verifiers to be installed into the Large housing.
  •  Use of the Dual Aperture Wrench (#210078) is required to install the Peep Reducer (#753-3) into your Large peep.
  • Large Peep and component weights:
    • Large Non-hooded Peep – 12.5 grains
    • Large Hooded Peep – 15.0 grains
    • Large Clarifiers/Verifiers – 5.5 grains
    • Peep Reducer (#753-3) – 3.1 grains
      • Peep Reducer with 1/8″ Clarifiers/Verifiers inserted- 7.1 grains
    • Large Peep Aligner (#PAL) – 15.0 grains
  • Optional Accessories:
    • VC3 Threadmate Non-Traditional Threadlocker 5ml
    • PG1 BLK or RD Peep Guard Black or Red
  • Additional information can be found in the FAQs tab on our home page

CAUTION: High powered bows create a great amount of vibration.  This may loosen Verifiers, Clarifiers and Apertures over time.  Tighten your apertures before each use.  If you hear a buzzing sound, this indicates a loose aperture. You may use a drop of Vibra-Tite VC 3 (#VC3), Teflon tape, bow wax, or any other non-permanent binding agent on the threads.

Additional information

Weight 0.04 lbs
Dimensions 5.5 × 3.125 × 0.75 in

Reviews

There are no reviews yet.

Be the first to review “Peep Reducer”